Advertisement
Sky Hook Installation
7
1. Put the two rubber sleeves(3) on the marked
locations on the generator frame.
2. Mount the holding plates(4), skyhook assemble (2)
on the frame with the four bolts M8x20(5) and
tighten.
1-Generator, 2-Skyhook assemble(1), 3-Rubber Sleeve(2).
4-Holding plate(2), 5-Bolt M8x20(4)
Note:
The Sky Hook is limited to the weight of the generator
(293 pounds) any added weight will cause damage and
void warranty and liability.
Wheel & Handle Kit Installation
1. Assemble the two wheels(5) on the axle(4), then attach
them with the two washers (8) and two split pins(9)
2. Mount assembled axle (4) to the frame with axle holder(10),
bolt(6)and nut (7). Refer to diagram#1
3. Fit the two stands(11) on the frame with the two bolts(6)
and nuts(7)
4. Fit the two handles(13) on the connecting block (12) with the
two bolts(15) and nuts(7), then mount the assembled handle
on the frame.
6
1
3
2
9
8
5
10
7
1.Diagram-Mounting axle (2. Shorter end 3.Longer end)
4.Wheel axle(1)
5.Wheel(2)
9. Split pin(2)
6.Bolt M8X16(6)
10.Axle holder(2)
7.Nut M8(8)
11.Stand(2)
8.Washer(2)
12.Connecting block(2)
Customer Support:1-866-409-4581
12
15
7
6
11
7
6
4
8
7
9
13.Handle(2)
14.Handles sleeve(2)
15.Bolt M8X40(2)
15
13
14
Advertisement
