Related Manuals for Crosley CR12151-WA
Summary of Contents for Crosley CR12151-WA
- Page 2 Please read and keep these instructions handy. Please follow all instructions and heed all warnings. Do not use this jukebox in or near water. Jukebox is for indoor use only. Clean only with a dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Page 3 Remove and save all packing materials from jukebox for warranty purposes. Power Source and Initial Set-Up 1. Remove the AC power adapter and cord from the packing material and connect the AC power cord to the AC adapter. 2. Plug the small end of the adapter into the DC jack on the back of the jukebox. 3.
- Page 4 Press the front POWER button located on the right front panel behind the simulated title strips. The simulated title strip panel flips down to reveal all necessary jukebox controls. Volume Control: Press VOL + (UP) or VOL (DOWN) on the remote or on the front panel to adjust the volume.
- Page 5 Nearly all the functions of the jukebox can be operated remotely. For best performance, the remote control should be pointed toward the jukebox and have a clear path for the signals to travel. Ensure the remote has two fresh AAA batteries. Batteries are included with the jukebox but must be installed prior to initial use.
- Page 6 Playing a CD 1. Press the Input button on the remote or front panel to select the CD operation mode. 2. Open the simulated title strip compartment and press the Open/Close button on the remote or on the front panel to open the CD compartment. 3.
- Page 7 3. Press PROGRAM to confirm, display shown stored track No. and next store position. 4. Repeat steps to select and store all desired tracks. FULL is displayed if you attempt to program more than 20 tracks. 5. Press PLAY/PAUSE to play the program 6.
- Page 8 MIX mode. The ST15-WA Crosley Jukebox Stand is sold separately and elevates the height of the jukebox slightly for easier user operation while providing a convenient storage location for CDs and the remote.
- Page 9 No Power Ensure jukebox is plugged in to wall socket correctly. Verify the LED is glowing green on the AC adapter attached to the jukebox and wall socket. Ensure wall socket is working properly and not switched off. Ensure AC adapter has all connections tight from the wall socket to the jukebox. Remove the AC adapter from the back of jukebox and plug back and ensure the rear POWER switch is ON.