Advertisement
Installation Instructions
LINE
INSTALLATION OF IN-USE RECEPTACLE (RE3 Option)
In-Use
Receptacle
COM
GROUND
GROUND
BASE
1.
Open receptacle cover. Receptacle cover has
captive #6-32 screw for use with a 7/64" allen
wrench.
DATA
RJ45
WIRING DIAGRAM
6. Attach in-use receptacle to installed anchor
base and plate with four (4) #10-32 button
head stainless steel cap screws at the base
using a 1/8" allen wrench.
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
B-K LIGHTING
2. Loosen two (2) #6-32 screws with a 7/64"
allen wrench to remove inner bracket with
RJ45 jack.
In-Use
Receptacle
4. Place connections into bollard. Attach inner
bracket with RJ45 jack with two (2) #6-32
screws with a 7/64" allen wrench.
7.
Receptacle cover has captive #6-32 screw.
Secure receptacle by tightening captive #6-32
set screw using a 7/64" allen wrench.
Receptacle cover has two (2) openings for
in-use cord sets.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
Receptacle Bollard
3. Connect incoming data cable to RJ45 jack as
per installation plan. Follow manufacturer's
instructions as per cable and method of
connection to RJ45 jack (cable and connections
required By Others). See wiring diagram.
5. Place connection(s) and/or cable inside
receptacle.
RELEASE DATE
REFERENCE NUMBER
12/21/2021
INS-2701-00
Advertisement
