Restoring the DEFAULT unit of measurement:
1
It is possible to restore the units of measurement of
all indications displayed on the instrument panel.
Use buttons (1) and (2) to select "DEFAULT" with
flashing frame (Fig 93) and press button (4).
"WAIT.." will be displayed for 2 seconds. Successively,
the "DF - OK" (Fig 94) message will be displayed for
another 2 seconds to indicate that the units of
measurement have been restored.
4
2
Successively, the display will show the flashing
"SPEED" indication again (Fig 89).
Fig 93
Fig 94
97