section
P 2
Refitting the battery
A
Install the battery in the battery support and secure it with the elastic retaining strap (2).
Warning
Connect the positive lead (19) to the positive terminal and the negative lead (16) to the negative terminal, as shown in the photo.
Insert the screws in the terminals (16) and (19) always starting with the positive terminal (red lead).
B
Warning
Position the leads (16) and (19) as shown in the photo.
Tighten the terminal screws to the specified torque (Sect. C 3, Frame torque settings) and apply grease to the terminals to
C
prevent corrosion.
Fit the protective caps to the battery terminals.
D
E
F
G
H
L
M
N
P
42
Electrical system
16
1
2
19
Monster 696/696+ - M.Y. 2009 - edition 00