Chapter 4 Uefi Setup Utility; Introduction - ASROCK H310CM-HDV User Manual

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction

his section explains how to use the UEFI SETUP UTILITY to conigure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
ater you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY ater
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system of
and then back on.
Because the UEFI sotware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
34