Panasonic PV-L550 Manual page 73

PV-D300 / VM-D100 / PV-L550 / PV-L600 / PV-L650 / VM-L450
7.3.5. SET UP OF PC-EVR ADJUSTMENT
PROGRAM
1. Turn on the Personal Computer.
Windows® 95 will be set up automatically.
2. Restart it in MS-DOS mode.
3. Change the current directory to the one including the PC-
EVR Adjustment Program and start up the PC-EVR
Adjustment Program as follows.
"Select Model Number Menu" will be displayed.
4. Select the model number which you are servicing, and then
press "Enter" key. The starting display will be displayed.
5. Perform set up items according to menu until "Main Menu"
is displayed.
6. Select "Sub Menu" to adjust or check, etc. the camcorder.
Note:
The adjusted data is stored to EEPROM IC after each
adjustment.
7.3.6. HOW TO USE MAIN MENU
Main Menu
Select "Sub Menu" by pressing ↑ ↓ (UP/DOWN) key in Main
Menu. Then, adjust or check the camcorder according to the
menu. Then, press "ENTER" key. "Sub Menu" will be
displayed.
Note:
Menu 5 through 8 are needed for adjustment.
Also, by pressing ← → key, "Sub Menu" can be seen in order
below.
72
Fig. E4-1
Fig. E4-2