Basic Procedure Of Adjustment Menu Operations - Fujitsu plasmavision User Manual

BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS

• Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint))
(Ex. the W/R models)
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
E-20
1
Press .
The main menu screen will appear.
2
Press or
Each time you press
menus appears in the following sequence:
PICTURE POSITION/SIZE
FACTORY DEFAULT
The PICTURE Menu screen will appear.
3
Press or
4
Press .
The "Tint" adjustment screen will appear.
5
Press or
: More greenish colors
: More purplish colors
6
Press to store.
7
Press when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* When is pressed after you have selected
"Default", the settings are returned to those that
were valid when you purchased the set.
* Press to halt the operation in progress.
to select "PICTURE".
or , one of the available
AUDIO FEATURES
to select "Tint".
to change tint values.
"PICTURE" selected in the main
menu screen
"Tint" selected in the PICTURE
Menu screen
"Tint" adjustment screen