Temperature Controls; Looking Inside - Frigidaire Single Door Refrigerator 297005500 Use And Care Manual

Single-door refrigerator
Table of Contents

Advertisement

COOL DOWN PERIOD
For safe food storage, allow 4 hours for the refrigerator to
cool down completely. The refrigerator will run continuously
for the first several hours.
TEMPERATURE CONTROL
The temperature control is located inside the refrigerator. The
temperature is factory preset to provide satisfactory food
storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your
personal satisfaction. If a colder temperature is desired, turn
the temperature control knob toward COLDEST and allow
several hours for temperatures to stabilize between adjustments.
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or exposed to sudden temperature change.
To adjust cantilever shelves:
NOTE: Cantilever shelves are supported at the back of
the refrigerator.
1
Lift front edge up.
2
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf
into the wall bracket. Lower the shelf into the desired slots
and lock into position.
INTERIOR LIGHT
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical cord. Replace the old bulb
with a bulb of the same wattage.

Temperature Controls

Looking Inside

6
Cold Control
Full Width Cantilever Glass Shelf

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Single-door refrigerator

Table of Contents