IQ 310 System Manual
For these LEDs...
ALM (Alarm)
TST (Test)
DBU (Dial Backup)
4.
REVIEWING THE REAR PANEL DESIGN
The IQ 310 rear panel contains two expansion slots (one for Dial Backup and one for a Network Interface
Module), a DTE connector which provides primary channel V.35, and an Ethernet 10BaseT port for
management applications (see Figure 2).
V.35 Nx56/64 Connector
The DTE should be connected to the V.35 connector (labeled V.35) with a maximum cable length of 100 feet.
Table 2 on page 24 shows the pinout for the V.35 Winchester-style connector.
61203800L1-1A
Table 1. IQ 310 LEDs (Continued)
This color light... Indicates that...
Red
one of the following alarm conditions exists:
•
•
•
•
Amber
the network interface is in a loopback condition triggered
locally or from the service provider.
Red
the unit is in dial backup.
Figure 2. IQ 310 Rear Panel
© 2004 ADTRAN, Inc.
Section 2, Engineering Guidelines
Loss of signal
Loss of T1 frame sync (red alarm)
Receiving AIS (alarm indication signal) from the service
provider
Frame Relay signaling is down.
23