Care And Maintenance; Resetting The Detector - Radio Shack Discovery 200 Owner's Manual

CARE AND MAINTENANCE
Your RadioShack Discovery 2000 Metal Detector is an example of superior design
and craftsmanship. The following suggestions will help you care for your detector
so you can enjoy it for years.
Use and store the detector only in normal temperature environ-
ments. Temperature extremes can shorten the life of electronic de-
vices and distort or melt plastic parts.
Keep the detector away from dust and dirt, which can cause prema-
ture wear of parts.
Handle the detector gently and carefully. Dropping it can damage
circuit boards and cases and can cause the computer to work im-
properly.
Use only fresh batteries of the required size and type. Old batteries
can leak chemicals that damage your detector's electronic parts.
®
Wipe the detector with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong de-
tergents to clean it.
.,
Modifying or tampering with the detector's internal components can cause a mal-
function and might invalidate its warranty. If your detector is not performing as it
should, take it to your local RadioShack store for assistance.
The searchcoil supplied with the detector is waterproof and may be submerged in
either fresh or salt water. However, do not let water enter the detector's chassis.
After using the searchcoil in salt water, rinse it with fresh water to prevent corro-
sion of the metal parts.
RESETTING THE DETECTOR
If the detector does not work properly after you replace the batteries, or if it stops
working and sounds a continuous tone, you might need to reset it.
To reset the detector, turn
SENSITIVITY
on and off three or four times.
16