Hummer H3 User Manual page 9

Multifunctional power bank
Hide thumbs Also See for H3:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
FAQ:
Q1: What are the features of the H3?
A1: Apart from jump starter function, the H3 can be used to recharge virtually any 5V
powered USB devices, such as mobile smartphones, tablets, portable gaming system,
digital cameras, camcorders, and portable GPS devices, etc. It can also jump start a
drained car battery with the included Sparkless Smart Cable. It is also equipped with a
built-in ultrabright LED flashlight.
Q2: How does the Sparkless Smart Cable work?
A2: If the green indicator light is on, means ready to jump start; If the red indicator light
is on, means a misconnection between the clamp and the battery terminal; If no light is
on, press the BOOST button for 3 seconds until the green indicator light turns on, by
which time the jump starter is ready for use. If the red indicator light is blinking, means
the Reverse Charge protection is activated or Low Battery.
Q3: Will reversing polarity connections of the jump start cable damage the vehicle?
A3: Not at all, the H3 is very safe with Sparkless Smart Cable. If you accidentally connect
the RED and BLACK cable clamps to the wrong polarity terminal and attempt to jump
start the vehicle, the Sparkless Smart Cable (the red indicator light is on) will cut the
power immediately to prevent injury and avoiddamaging the vehicle.
Q4: What if it doesn't jump start the vehicle?
A4: If the H3 fails to jump start the engine, please wait at least 10 seconds before
attempting to try again and please do not crank the engine continuously for more than 5
seconds each time. If still not succeed after 3 attempts, it may be due to other
problems of the vehicle. Do not try to crank the engine continuously for more than 10
times in a row. It is also highly recommended to replace the vehicle battery once every
2-3 years.
Q5: How many times can the H3 jump start a vehicle?
A5: Approximately 10 times with a 100% fully charged battery. Actual results may vary
due to battery conditions.
Q6: How long is the H3 standby time?
A6: The standby time of H3 is up to 6 months if it is fully charged. It is recommended to
fully discharge the battery via USB output port and recharge to full every 3 months to
prolong its battery life. Result may vary depending on the owner usage and the
battery conditions.
Q7: How long will it take to fully recharge the H3 to the maximum
battery level?
A7: It takes about 3 to 4 hours through the 5V/2A input port. Actual results may vary due
to battery conditions. It is not recommended to use 1A adapter.
Q8: How long will it take to fully recharge a smartphone or USB
devices?
A8: The number of times you can recharge a smartphone will vary between different
smartphones and devices. For recharge times, contact your device manufacturer.

Advertisement

Table of Contents
loading

Table of Contents