Fostex DV824 Owner's Manual page 32

DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
9) [ETHERNET] port
This port is used to connect to the Ether network.
The connector type is RJ45 (conformed to 100/10BASE-T FTP).
The LINK and TX/RX indicators light in the following conditions.
• The LINK indicator lights when the unit recognizes the network.
• The TX/RX indicator flashes when the unit is sending or receiving data.
10) [WORD IN]/[WORD OUT] connector
The [WORD IN] connector receives a word clock signal.
The [WORD OUT] connector feeds word clock signal.
The connector type is BNC.
11) [DIGITAL I/O AES/EBU] connector
This connector inputs and outputs AES/EBU or S/P DIF digital signals.
You can set the digital input channel by the "Setup Digital In" menu item of the
"SYS SETUP" menu in the MENU mode (see page 119 for details).
The unit automatically detects the digital input signal format.
The digital output signal format can be set by the "Digital out" menu item of the
"SYS SETUP" menu in the MENU mode (see page 120 for details).
The connector type is D-sub 25-pin.
13
25
* The connector pin assignment is compatible with the D-sub 25-pin
connectors on YAMAHA equipment.
12) [WORD IN] terminate switch
Terminates the word input signal by setting the switch to "ON".
13) [ANALOG OUTPUT BALANCED] connectors
These connectors output analog audio signals of tracks 1 through 8.
The connector type is XLR-3-32 (balanced/+4dBu).
1
2
Signal
1
Input 1/2
Input 3/4
Input 5/6
Input 7/8
Output 1/2
14
Output 3/4
Output 5/6
Output 7/8
Frame GND
Open
GND
1
3
2 HOT
COLD
3
32
Hot
Cold
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
8
10, 12, 13, 22, 23
24, 25
9, 11