Power Wheels P5064 Owner's Manual page 10

Seat
Vehicle
3
• Rotate the seat back and lift to remove from the vehicle.
4
• Locate the motors inside the vehicle.
• Make sure each motor is positioned in the rectangular recesses
inside the vehicle.
10
FRONT VIEW
Motors
TOP VIEW
ASSEMBLY
Rear Axle Assembly
5
• Slide the rear axle assembly through the hole in one motor, the
back end of the vehicle and then out through the other motor.
Wheel
(Rib Side In)
Hubcap
(Peg Side In)
6
• Turn the vehicle upside-down.
• Slide the other rear wheel driver, ring side out, onto the rear axle.
Make sure the rear wheel driver fits onto the pins in the motor.
• Slide a wheel, rib side in, onto the rear axle. Make sure the ribs
on the wheel fit into the grooves on the rear wheel driver.
• Slide a hubcap, peg side in, onto the rear axle.
Motors
Hole in Motor
Rear Wheel Driver
(Ring Side Out)
Rear Axle
Motor
BOTTOM VIEW
P5064pr-0922