Honeywell TC500A User Manual page 29

Setting up the Conventional or Heat Pump equipments
Setting up conventional type of equipment
1. Tap Conventional.
2. Select the number of Cooling stages.
Tap corresponding number to select number of stages.
3. Tap NEXT
User will be prompted to select the Heating Type/Stages
4. Tap corresponding number to select number of stages.
To set up modulating heating type, tap on Modulating toggle.
31-00400M-01 | Rev10-20
STEP 3. CONFIGURATION THROUGH THERMOSTAT TOUCHSCREEN DISPLAY
Figure 12 Select Conventional type of equipment
Figure 13 Select number of colling stages
29