Other Function Setting; Blue Back; Display; Ceiling - Fisher PLC-XP17N Owner's Manual

Sanyo fisher co. owner's manual multimedia projector plc-xp20n, plc-xp17n

Table of Contents

This projector has other functions settings: Blue back, Display, Ceiling, Rear, Split wipe, Power management, Remote

control and Lamp age.

See the next page menus figure and settings.

BLUE BACK (On or Off)

When this function is in the "On" position, the projector will project a blue image without video noise on the screen when

the video source is unplugged or turned off.

DISPLAY (On or Off)

When this function is in the "On" position, on-screen displays always appears when adjustments are made. Although

these on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To

avoid this, you can keep back certain displays by switching this function "Off". The followings are the displays that you

can hide.

Wait Display

Mute Display

D.Zoom Display

Normal Display

CEILING (On or Off)

When this function is in the "On" position, the top/bottom and the left/right

picture reverse capability lets you project from a ceiling-mounted projector.

REAR (On or Off)

When this function is in the "On" position, the left/right picture reverse capability

lets you project onto a rear projection screen.

SPLIT WIPE (On or Off)

Turn SPLIT WIPE function On in the SETTING menu. The picture will change into the next one by sliding black image

side ways when the input source is changed.

Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the

next one appears from the center to side ways like drawing the black curtains.

POWER MANAGEMENT (On or Off)

Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) over

5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is input.

To activate this function, turn the "Power management" in the SETTING menu "On".