Panasonic SA-AK630E Service Manual page 47

Step 13 Rotate the lower spindle in the direction of arrow until the lower spindle interferes with
stopper.
Step 14 Insert the thin tip of minus screwdriver between the lower spindle and UP/DOWN base,
and then slacken the lower spindle to release the stopper. Then, rotate the lower spindle and
remove it.
Step 15 Rotate the UP/DOWN base at a 90° angle. Then, spread the hold bars of loading stopper
and remove the UP/DOWN base.
[Installation for loading stopper ass'y]
Step 1 Align the claw of loading stoppers ass'y with the slot of spindle base. (Caution should be
exercised when alignment of claw due to the size of claws.)
Step 2 Lower the loading stopper ass'y, and then align the lower spindle with the trapezoid
tooth of relay gear A.
47
PDF created with pdfFactory Pro trial version www.pdffactory.com