Sharp 32R-S50 Service Manual page 7

LOCATION OF USER'S CONTROL
(32R-S400, 36R-S400, CR32S40)
Front Panel
POWER
Press → On.
Press again → Off.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
POWER – VOL + CH
MENU
POWER – VOL +
SENSOR AREA FOR
REMOTE CONTROL
POWER
TV DVD
VCR DISPLAY INPUT
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C D
CH
VOL VOL
— +
CH
MENU MUTE
CATV
DVD
REW PLAY FF
CH/SKIP
PAUSE STOP REC
PIP
SWAP FREEZE MOVE SELECT
TV • CATV • VCR • DVD
7
(Continued)
VIDEO/AUDIO IN 2
(VIDEO/AUDIO terminals are also
provided on the rear.)
CH
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
MENU
( ) Selects next lower channel. "
• Press both at the same time to
access the MAIN MENU screen.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode.
Press 2 times → Switch to external video
INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode.
ENTER
Used in some instances where a Cable
TV
Converter Box requires an "enter"
command after selecting channels,
VCR
when using the REMOTE KEYPAD
button.
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
( ) Selects next lower channel. "
• Moves the " " mark of the MENU
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at the same time.
32R-S50/S400,
36R-S50/S400,CR32S40
TERMINALS