Appendix; Lamp Replacement; Lamp Replace - Fisher PLC-SW20AR Owner's Manual

APPENDIX

When the life of Projection Lamp of this projector draws to an end,
LAMP REPLACE indicator lights yellow. If this indicator lights yellow,
replace the projection lamp with a new one promptly.
Allow a projector to cool, for at least 45 minutes before
you open Lamp Cover. The inside of a projector can
become very hot.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the
following information to the dealer.
G
Model No. of your projector
G
Replacement Lamp Type No.

LAMP REPLACEMENT

LAMP REPLACE

For continued safety, replace with a lamp assembly of
the same type.
Do not drop a lamp assembly or touch a glass bulb! The
glass can shatter and may cause injury.
: PLC-SW20AR
: POA-LMP37
(Service Parts No. 610 295 5712)
37