Viewing The Current Date And Time; Setting The Date And Time - First Alert FA130CP User Manual

The system lets you view its time and date setting on alpha keypad.
+[#] + [6] [3]
(Security Code)
OR, press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
A typical time/date display is shown.
The display will remain on for about 30 seconds.
" A "
If one of the above keys has been programmed for the date/time
display feature, place a check mark in the box beneath that key.
You can set the time and date by doing the following:
1. +[#] + [6] [3]
(Security Code)
2. Press [∗] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [ ∗ ]. To go back, press [#].
• Enter the 2-digit hour setting.
• Enter the 2-digit minute setting.
• Press [1] for PM or [0] for AM.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting.
• Enter the 2-digit day setting.
3. To exit, press [∗] when cursor is at the last digit, or
wait 10 seconds.
" B " " C " " D "
Alpha Display:
Alpha Display:
Current time display
Time/date editing display
– 23 –