Software Updates - Sharp AQUOS Operation Manual

<<

Software Updates

To search for new software updates via Over-The-Air
Refer to " (HOME)" > "Settings" > "Device Preferences" > "About" >
"System update".
NOTE
Make sure your TV is connected to the internet when performing software
updates via OTA.
After finished downloading, please allow some time to apply the installed
updates.
During installation, please do not perform any operations, including power
off or unplug your TV.
Software updates performance is depending on internet connection.
OAD
Refer to "TOOLS" > "TV options" > "Advanced Options" > "OAD".
This function is for automatically download the data for the version update
software over digital broadcasts when the "Auto Download" is set to "On".
To download, follow the instructions when the download message appears
during a digital broadcast.
Once the software upgrade is done, the TV will automatically go to
standby state with Red LED.
CAUTION
Do not disconnect the AC cord when the software upgrade is in
progress, as this may cause the upgrade to fail. If problem arises ask
a qualified service personnel before the software upgrade period
expires.
Software License
Refer to " (HOME)" > "Settings" > "Channel" > "Open Source Licenses".
You can read the software licenses in the on-screen display menu.
Software composition
The software included in this product is comprised of various software
components whose individual copyrights are held by SHARP or by third
parties.
Software Version
Refer to " (HOME)" > "Settings" > "Device Preferences" > "About" >
"Software Version".
You can check the current version of the software on the screen.
EN 1-6
>>