Page 1
M-23 2R05 / 2R06 NSY2R0C1-A2109 2R05 / 2R06 MECHANICAL WATCH INSTRUCTIONS 日本語 ..........English ..........そのほかの言語の取扱説明書は、パソコンや Please refer to the Instruction Manuals スマートフォンから当社ホームページ内の of other languages by accessing 「カスタマーサービス」 > 「取扱説明書ダウンロード」 "Customer Service"→ "Instruction" にアクセスいただき、ご覧ください。 on our Website from PC or Smartphone. Deutsch / Français / Italiano / Español / ...
○ If the watch body or band becomes edged by corrosion etc. electricity ○ If the pins protrude from the band. * Immediately consult the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER. If you observe any allergic symptoms or skin irritation Stop wearing the watch immediately and consult a specialist such as a dermatologist or an allergist.
Immediately consult the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER. b CAUTION Do not leave moisture, sweat and dirt on the watch for a long time.
■ 2R06 Crown 1 Minute hand There are two types of crowns, a normal crown and a screw down crown. 2 Hour hand Please check the type of the crown of your watch. 3 Seconds hand Normal crown While 4 Date and day of the week pressing the crown crown in, turn it...
How to set the time and date (2R05) Pull out the crown to the first Pull out the crown to the first click. The watch is provided with a date function and is so designed that the date changes once every click * For models with screw down crown, 24 hours.
How to set the time, date, and day of the week (2R06) Pull out the crown to the first Pull out the crown to the first click. The watch is provided with a date and day of the week function and is so designed that the date click * For models with screw down crown, and day of the week change once every 24 hours.
Daily care Performance and type ● The watch requires good daily care The case back shows the caliber and performance of your watch • Do not wash the watch when its crown is in the extended position. Water resistant performance •...
Magnetic resistant performance Examples of common magnetic products that may affect watches Affected by nearby magnetism, a watch may temporarily gain or lose time or stop operating. b DANGER Indication on the case back Condition of use No indication Keep the watch more than 5 cm away from magnetic products. Smartphone, cellular phone, tablet terminal AC adapter (JIS level-1 standard)
● Silicone band How to use tri-fold type clasp for leather band (Special clasps) • As for material characteristics, the band is easily dirtied, and may be stained and discolored. Wipe off dirt with a wet cloth or cleaning tissue. •...
C Type ● How to adjust the length of the band While pressing the push buttons on both sides Press the push buttons again to unfasten the of the flap, pull the band out of the movable flap. loop and fixed loop. Then open the clasp. Buckle Push button Fixed loop...
Inspection and adjustment by disassembly and cleaning (overhaul) should be performed by the retailer from whom the watch was purchased, and who specifies “SEIKO GENUINE PARTS.” At this time, also • Please keep in mind that if original parts are not available, they may be replaced with substitutes whose request replacement of the gasket and the spring bar.
○ Mainspring wound condition and accuracy Accuracy of mechanical watches In order to improve accuracy, it is important to regularly supply energy to the balance that controls the speed ○ The accuracy of mechanical watches is indicated by the “daily rate.” of the gears.
Specifications Cal. 2R05 2R06 1. Features 3 hands (hour, minute, second), date 3 hands (hour, minute, second), display date/day of the week display 2. Vibrations per hour 21,600 vibrations/hour (6 vibrations/sec) 3. Loss/gain (daily rate) +45 to -35 seconds at normal temperature range Only if worn on the wrist in a temperature range of 5°C to 35°C 4.