Note: The strip cover is fragile and easily-bent. Replace the strip cover after removal.
Go to
https://support.lenovo.com/partslookup
replacement part:
Strip cover
Remove the LCD panel
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the upper case (with keyboard)" on page 42
"Remove the strip cover" on page 44
Step 1.
Remove the acetate tape.
Figure 27. Remove the acetate tape
Step 2.
Disconnect sensor board cable and remove four screws. Pull out the removable tapes. Then, lift the
LCD panel.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
45