Remove the LCD panel
Make sure the following FRUs (CRUs) have been removed.
"Remove the upper case" on page 38
"Remove the LCD bezel" on page 40
Step 1.
Pull out two removable tapes, and then lift the LCD panel upward.
Figure 25. Pull out adhesives and lift the LCD panel
Step 2.
Peel off the tapes attached to the EDP cable and disconnect the EDP cable. Then, remove the LCD
panel.
Figure 26. Disconnect the EDP cable and remove the LCD panel
.
Chapter 4
Removing a FRU or CRU
43