SPECIFICATIONS
Operating Pressure
Actuation
Dimensions
Length x Height x Width
Weight
Staple Capacity
Air Consumption
Air Inlet
STAPLE SELECTION
WARNING
Be sure to use only the genuine HITACHI staples for the
•
N2503AF. The use of any other staples can result in tool
malfunction and/or staple breakdown, leading to serious
injuries.
Only Staples shown in the table below can be driven with this
Stapler.
20 GAUGE STAPLE
.04" (.95mm)
APPLICATIONS
TONGUE AND GROOVE FLOORING
•
MOISTURE BARRIER
•
SUBFLOOR
•
Tongue and Groove
Flooring
Moisture
Barrier
Subfloor
The N2503AF Pneumatic Flooring Stapler, with the standard
shoe, drives 1" Staples into the tongue and groove flooring at a
45 degree angle. The orientation of the Staple is as depicted
above.
All manuals and user guides at all-guides.com
MIN.
MAX
.188" (4.8mm)
1" Staple
70-100 psi (4.8-6.9 bar 4.9-7.0 kgf/cm2)
Trigger operated - Sequential
10-1/8" x 9-5/8" x 2-5/16"
(257mm x 244mm x 59mm)
3.2 lbs (1.4 kg)
100 Staples
.026 ft3/cycle @ 80 psi
(.74 ltr/cycle @ 5.5 bar)
(.74 ltr/cycle @ 5.6 kgf/cm2)
1/4" NPT Thread
STAPLE APPLICATION CHART
STAPLE
APPLICATION
1" STAPLE
Angle fastener onto
5/8" - 3/4"
underlayment over
joist construction.
ACCESSORIES
WARNING
Accessories other than those shown below can lead to
•
malfunction and resulting injuries.
STANDARD ACCESSORIES
2. Safety Glasses
1. Carrying Case
1. Carry Case
NOTE: Accessories are subject to change without
any obligation on the part of HITACHI.
BEFORE OPERATION
Read over section titled "SAFETY" (pages 4 - 7)
Make sure of the following before operation.
WORKING ENVIRONMENT
WARNING
No flammable gas, liquid or other flammable objects at
•
worksite.
Clear the area of children or unauthorized
•
personnel.
9
English
T&G FLOORING
THICKNESS
1/4", 5/16", 3/8", 7/16"
3. Wrench Set