EverFocus EDVR SERIES Instruction Manual page 80

3. After enabling an event, you need to set a time period (TP) in the SCHEDULE SETUP
MENU. An event recording must be set in a scheduled time period (TP). You can refer to
the SCHEDULE SETUP MENU for time period configurations (Chapter 3.8).
Note:
○
Set the normal record speed as 0 IPS in the CAMERA SETUP MENU, and Set the time
1
period (TP) from 00:00 to 00:00 daily in the SCHEDULE SETUP MENU if you only want to
record an events activity recording (motion or alarm).
○
Please be reminded that Schedule setting must be done after Camera setting for event
2
recording setup.
○
If user changes recording speed while the machine is recording, the new recording speed
3
won't take effect. Therefore, stop recording first before changing the recording speed.
Diagram 4.4
70