EverFocus EDVR SERIES Instruction Manual page 19

This connector is used for the main monitor display, a number of different display
modes may be selected for viewing.
○
CALL MONITOR
4
This connector is used for the call monitor. This monitor can only display a full
screen, but not able to enter Setup Menu.
VIDEO IN
○
16 CH:
5
VIDEO OUT (1~16): BNC connectors for video looping out 1~16.
VIDEO IN (1~16): BNC connectors for video input 1~16.
9 CH:
VIDEO OUT (1~9): BNC connectors for video looping out 1~9.
VIDEO IN (1~9): BNC connectors for video input 1~9.
4 CH:
VIDEO OUT (1~4): BNC connectors for video looping out 1~4.
VIDEO IN (1~4): BNC connectors for video input 1~4.
ALARM INPUT/OUTPUT
○
ALM-INPUT
6
Normal open or normal close type alarm signal inputs.
The Alarm Input can be selected as normal open (N.O.) or normal close (N.C.) input
in the ALARM SETUP MENU. When an alarm occurs, alarm recording will
automatically start.
ALM-OUTPUT: A built-in relay offers 3 nodes which are ALM-COM (common),
ALM-NO (normal open) and ALM-NC (normal close) for external use.
Note: Please check APPENDIX C to see other available alarm input/output
functions.
LAN
○
LAN Connector
7
The RJ-45 LAN connector.
9