Table of Contents
Advertisement
PTZ-CONTROL WITH WEB BROWSER (from FW 1.09 only)
If the checkbox "PTZ CONTROL" is activated in the Web' s applet of the EDSR600/900/1600,
the screen shows the telemetry control functions.
Please consider the time delay in video network transmission at manual PTZ control!
PTZ network control is not recommended for ISDN or analogue transmission lines due to
slow video transmission rate and long video delay.
Control buttons:
1. PTZ CAMERA:
2. REACTION METHOD: Reaction method of PTZ keys
3. Arrow keys:
4. Z+ / Z-:
5. Focus:
6. IRIS:
7. PRESET:
8. SEQ.*:
9. AUTO PAN**:
* function not supported for ED2250 with PELCO - P Protocol
** function not supported for ED2250
51
Camera selection
Continuous - commands send permanent if
button is pressed
Step x 10 - 10 command / key press
Step x 5 -
5 command / key press
Step x 1 -
1 command / key press
Control of pan / tilt
Zoom function Z+: tele, Z-: wide
manual focus NEAR or FAR
manual iris control INC: open iris
DEC: close iris
Preset selection
SET: Storing of current PTZ position
CLR: Deleting of selected preset
GO: calls the selected preset position
Preset tour
1 ~ 60 sec.: Dwell period between presets in
tour
RUN:
Start preset tour
STOP:
Stop preset tour
Automatic Pan – function
Low-Fast: AUTO PAN speed
RUN:
AUTO PAN Start
STOP:
AUTO PAN Stop
MENU
Hide quick links:
Advertisement
Table of Contents
