Call - EverFocus EDR1620 Instruction Manual

7. CALL

Press the CALL key and the CALL MENU will pop up as below.
In the CALL MENU, we define :
(1) SEQ: Sequence display on the Call/Matrix monitor. Press SEQ to switch "ON" or "OFF" of the
sequence status.
(2) OSD: Channel name display on the Call/Matrix monitor. Press DISPLAY to switch "ON" or
"OFF" of the OSD status.
(3) CAMERA: The display camera in the Call/Matrix monitor. Press Channel number to set camera.
(4) CALL/MATRIX 1~4: Display the call monitor and Matrix 1~4 monitors.
Press ENTER button to move between monitors which will enable you to make selection of
SEQ, OSD and CAMERA.
64