Eureka NEC101 Series Owner's Manual page 14

1. Choose a location near a power outlet. Locate a point
nozzle to hang freely.
2. Place the mount (T) against the wall and use a pencil
to mark drill holes.
Insert screws (U) through holes on mount and tighten
PROBLEM
The stick vac is not
cleaning well
The stick vac has
stopped or won't work.
14
Eureka Customer Service HELPLINE 1-800-282-2886
INSTALLING THE WALL MOUNT BRACKET
TROUBLESHOOTING
WHAT TO DO
1. Empty the dust cup (O)
(M) and (Q)
3. Wash the
4. Check for blockages
1. Charge the vac (check the mains socket works and the switch is
turned on)
2. It might be blocked – check items 1 to 4 above
3. The thermal cut out activated. Switch off the vac and leave the
motor to cool for an hour then try using again.
U
(V).
T
V