Eureka NEC101 Series Owner's Manual page 13

Ensure the stick vac is not plugged into the main power supply and is switched off before
dismantling the vac.
1. Check the dust cup (O) and empty if necessary.
extension pole (G).
4. Detach the extension pole (G) and look down it to see if there are any blockages. If there are, use
the handle of a broom to clear the obstruction. Take care not to damage the pole in the process.
5. Check the roller brush for any hair or thread which may have become wrapped around the roller.
Cut away with a pair of scissors. To do this safely, remove as shown in the 'Removing and
6. Once empty close the lid until it clicks shut.
Your stick vac can be stored safely and securely by hanging from the wall mount (T) supplied with
your product or by removing all the attachments and stowing together in a cupboard.
Either way will help avoid the product falling over and causing damage.
Always turn off and unplug from the mains supply before storing.
1. Remove any attachments if the stick vac was last used with them on.
2. Store the stick vac and accessories away safely in a dry place.
CLEARING A BLOCKAGE
(M) and (Q)
(I) or crevice tool (P) were in use, detach them from the hand vacuum (E) or
STORING THE CORDLESS STICK VAC
www.eureka.com
13