Installing Hdd; System Boot Up - Vista Viper User Manual

2.1

Installing HDD

Note: Hard disk drives are factory fitted.
Attention
1 Always switch off and unplug the unit.
2 Unscrew with a screw driver (+) and open the unit cover.
3 Install HDD in the bottom case.
4 Connect a data cable and power cable with HDD.
5 Close the cover and tighten screws.
2.2

System boot up

1 When initially powered up the NVR will display the following icons in order.
Note
2 When fully booted a buzzer will sound and the live screen will be displayed
3 In Log in screen, enter the ID, Password and press OK.
Note Default ID & Password is admin/admin
Please change password after login due to security.
Attention
VIPER-H4 user
manual V1.0
All manuals and user guides at all-guides.com

Withdraw the mains plug before installing HDD to reduce the risk of injury or
electrical shock, or device malfunction.

Make sure to check the compatibility of HDD with the device.
Installing new HDD might take more initialize time.
8