Cooking In Two Stages; Cooking In One Stage - Emerson MW9107WC Owner's Manual And Cooking Manual

When you touch START pad, the TIME
DEFROST indicator starts blinking to show
the oven is in the TIME DEFROST mode. The
display counts down the time to show you how
much defrosting time is left in the TIME
DEFROST mode. If the weight of food is more
than 0.6 pounds time entered is more than 4:16
in time defrost, the oven beeps during the
defrosting cycle to signal that the food needs to
be turned or rearranged. When the defrosting
time ends, you will hear 3 beeps.
Note : To prevent over-defrosting thin areas
or edges can be shielded with strips of
aluminum foil.

COOKING IN ONE STAGE

1. Touch POWER pad.
<The STAGE1 indicator lights and "P-"
is displayed.>
2. Touch the number pad for the power level
you want.
<The display will show what you
touched>
Note : If step 1 and 2 are omitted, the oven
will cook at full power.
3. Touch number pads for the cooking time.
<The display will show what you
touched>
4. Touch START pad.
Note : Your oven can be programmed for
59 minutes 99 sconds. (59:99)
Using lower power levels increases the
cooking time which is recommended for
foods such as cheese, milk and slow
cooking of meats.
When you touch START pad, the STAGE1
indicator starts blinking to show the oven is
cooking. The display counts down the time to
show how much cooking time is left. When
the cooking time ends, you will hear 3 beeps.

COOKING IN TWO STAGES

For the best result, some recipes call for one
power level for a certain length of time and
another power level for a different length of
time.
Your microwave oven can be set to change
from one to another.
1. Touch number pads for the desired
cooking time in the first stage
<The STAGE1 indicator lights and the
display will show the numbers you
pressed in order you touched.>
2. Touch POWER pad.
<The STAGE2 indicator lights and "P-"
is displayed>
3. Touch the number pads for the power
level you want in the second stage.
<The display will show what you
touched.>
4. Touch the number pads for the cooking
time you want in the second stage.
<The display will show the numbers you
pressed in the order you touched.>
5. Touch START pad.
When you touched START pad, both
STAGE 1&2 indicator lights come on,
STAGE 1 indicator light starts blinking to
show you that the oven is cooking in the
first of two cook stages. The oven will cook
at the power you selected for stage one. At
the end of stage one, the oven will beep and
start stage two, the STAGE1 indicator goes
off and the STAGE2 indicator starts
blinking. The display counts down the time
remaining in stage two. When stage two
ends, you will hear 3 beeps.
11