Emerson ES3 Owner's Manual page 21

4.) Press the TUNING/SKIP-SEARCH UP
panel of the main unit or on the remote control to set the display to the correct
minutes.
5.) Press the MEMORY/CLOCK SET button once
more. The time display stops flashing and the
clock begins to run.
Note: You must press the TUNING/SKIP-SEARCH UP
to adjust the time display within 8 seconds after you press the MEMORY/CLOCK
SET button, otherwise the digits will stop flashing and the time cannot be adjusted.
If this occurs press the MEMORY/CLOCK SET button again to start the display
flashing once more.
VOLUME, BASS LEVEL, AND DYNAMIC BASS BOOST
(D-BASS) CONTROLS
Volume Adjustments
Press the VOLUME UP
control to increase or decrease the volume. The volume level indicator appears in
the main display. The range is from "00" ( Minimum) to "40" (Maximum). The
system remembers the volume level when the power is switched ' Off' and returns
to the same level when the power is switched ' On' again.
Dynamic Bass Boost Control
Press the BASS BOOST button on the front panel or the remote control to increase
the bass response. The D-BASS indicator appears in the main display. Press
again to cancel the Bass Boost function.
Bass Volume Level Control
Rotate this control on the front panel of the subwoofer to increase or decrease the
amount of bass response from the subwoofer speaker.
ES3_ib032103.p65
or DOWN
or DOWN buttons on the front panel or the remote
20
20
buttons on the top
or DOWN buttons
21/3/2003, 10:31