To Perform Advanced Adjustments; Adjustment Items In Each Mode; To Adjust The Brightness [Brightness]; To Adjust The Contrast [Contrast] - Eizo FLEXSCAN S2233W User Manual

●
To perform advanced adjustments
Independent setting and saving of color adjustment are available for each
FineContrast mode.
●
Adjustment items in each mode
According to the FineContrast mode selected, the adjustable function differs.
√ : Adjustment available
Icon Function
Custom EyeCare
Brightness
Contrast
Temperature
Gamma
Saturation
Hue
Gain
Reset
●
To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight
(Light source from the LCD back panel).
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Brightness> from the <Color> menu, and press
The <Brightness> adjustment menu appears.
(3) Adjust the brightness with
The adjustment is completed.
●
To adjust the contrast [Contrast]
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Contrast> from the <Color> menu, and press
The <Contrast> adjustment menu appears.
(3) Adjust the contrast with
The adjustment is completed.
18
Chapter 2 Settings and Adjustments
−: Invalid for adjustment
FineContrast mode
sRGB
√ √ √
− −
√
−
√ √
−
√ √
−
√ √
−
√ √
−
√ √
√ √ √
or , and press
or , and press
Text Picture Movie
√ √ √
√ √ √
√ √ √
− −
√
√ √ √
√ √ √
− − −
√ √ √
.
.
.
.
.
.
Attention
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Perform the range adjustment first
when adjusting color for analog input
signals.
(Refer to "To adjust color gradation
automatically [Range]" on
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
NOTE
• The values shown in "%" or "K" are
available only as reference.
• Using the "ScreenManager Pro for
LCD" allows you to perform the color
adjustment by using the mouse and
keyboard of your PC. The adjusted
status can be registered as a color data
and restore the data later. (Refer to
"Chapter 4 Color Adjustment" on the
User's Manual for "ScreenManager
Pro for LCD".)
NOTE
• You can also adjust the brightness
by pressing or without
displaying the adjustment menu.
• When FineContrast is set to the
[EyeCare] mode and Brightness is
lowered to its minimum value, any
further adjustments will automatically
be transfered to Contrast. When
transferred to Contrast adjustment the
color of the value in the adjustment
menu will change.
NOTE
• In the contrast of 50%, every color
gradation is displayed.
• When adjusting the monitor, it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
– When you feel the image is dark
even if the brightness is set to
100%. (Set the contrast to higher
than 50%).
– When you feel the image is bright
even if the brightness is set to 0%.
(Set the contrast to lower than
50%).
page 16).