Mac Address Filtering - Edimax EW-7205APS User Manual

Parameter
Passphrase
Key 1 - Key 4
Default Key
Clear All Keys
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.

3.2.4 MAC Address Filtering

This Access Point provides MAC Address Filtering, which prevents the unauthorized
MAC Addresses from accessing your Wireless LAN.
Description
Enter a maximum of 32 alphanumeric characters in the text box and
press Generate button, the Access Point will generate a WEP key
automatically (refer to the 128-bit screen, the key is displayed after the
Access Point generate the key for the wording "test"). It is easy for user
to setup the WEP key. Note that this passphrase may not work with some
wireless products due to possible incompatibility with other vendor's
passphrase generators.
The WEP keys are used to encrypt data transmitted in the wireless
network. Fill the text box by following the rules below.
64(40)-bit WEP: input 10 digit Hex values (in the "A-F", "a-f" and "0-9"
range) as the encryption keys.
128-bit WEP: input 26 digit Hex values (in the "A-F", "a-f" and "0-9"
range) as the encryption keys.
Select one of the four keys to encrypt your data (only in 64-bit mode).
Only the key you select it in the "Default key" will take effect.
Press Clear All Keys button to clear all the WEP keys.
14
Wireless LAN Access Point Configuration