Clearing Drawer Faults - Northern Telecom DMS-100 Series Maintenance Manual

3-1

Clearing drawer faults

This chapter describes the procedure for clearing PCM30 line drawer (PLD)
faults. If a card replacement is required, refer to the "Card replacement
procedures" chapter of this document.
The procedure in this chapter begins at the peripheral module (PM) level of
the MAP terminal. If you are not at this level, get to the PM level from the
command interpreter (CI) level of the MAP terminal by typing
>MAPCI;MTC;PM
and pressing the Enter key.
PCM30 Line Drawer Maintenance Guide BCS33 and up