EAW KF760 Installation Instructions Manual page 26

All manuals and user guides at all-guides.com
KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01
8. Reinsert the connecting pins back in the holes from where they were removed from the bottom most
flown enclosure. Push the palleted KF761 aside.
9. Repeat the above steps for additional KF761s.
2.4.4 KF760s
1. Position an empty KF760 pallet under the array.
2. Drop the array onto the pallet until any rear splays close up and weight is just off the chain motors.
Ensure that the alignment pads on the bottom of the KF760 mate with their slots on the top of the caster
pallet rails. Ensure the Hinge Tubes on the bottommost enclosure mate with the hinge Tubes on the
pallet.
KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01 Page 25 of 29