EAW KF760 Declaration Of Conformity

DECLARATION OF WORKING LOAD LIMIT (WLL)
Product Model:
Description:
Dimensions (h x w x d): Vary by P/N
Material:
Supplied Accessories: Connecting Pin (button head)
OR
Accessories
COUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTS
United States of America

TECHNICAL SPECIFICATIONS

Similarly constructed rigging assemblies are used in many EAW products;
please contact the Applications Support Group to determine whether this
applies to your product. The minimum design factor and Working Load Limit
of a single rigging point are provided in the table below. This data is
applicable only when the rigging assembly and loudspeaker are used in the
manner described in the user's manual.
WLL (for one rigging point)
Ultimate Strength Design Factor
WLL (for one rigging point)
Ultimate Strength Design Factor
The ultimate strength for the KF760 and KF761 integral rigging points was
determined utilizing calibrated and certified destructive pull tests.
A WLL of 1,800 lb (816 kg) with an Ultimate Strength Design Factor >10:1
can be achieved by pinning through the loudspeaker above in the normal
manner and pinning through the bottom portion of the hinge as shown to the
right.
Eastern Acoustic Works
One Main Street
Whitinsville, Ma 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
PRODUCT
KF760 rigging: 255105, 255106, 255107, 255108
KF761 rigging: 255101, 255102, 255103, 255104
Rigging Assembly
Steel
Connecting Pin (replaced by above)
N/A
816 kg / 1800 lb
> 8:1
816 kg / 1525 lb
10:1
September 2007
p/n 0020558-01
p/n 179084
e-mail:
Pin here
for MAX
WLL
Tel: 800 992 5013
info@eaw.com
www.eaw.com