4.3.12 LCD Panel 32" models
1. Remove the rear cover, as described earlier.
2. Refer to figures "LCD panel (32" models)" below.
3. Unplug the connectors from the SSB [a].
4. Unplug the outer connectors [b] from the loudspeakers.
5. Unplug the connector from the LED & IR board [c].
6. Do NOT forget to unplug the LVDS connector [d] from the
SSB. Important: Be careful, as this is a very fragile
connector!
1
Mechanical Instructions
a
1
b
Figure 4-19 LCD panel (32" models)
LC7.1HE LA
7. Remove screws [1] that hold the mid-range speakers and
remove those.
8. Remove screws [2] that hold the central sub-frame.
9. Remove LCD panel fixation screws [3].
10. Lift the complete central sub-frame from the set (incl. the
i-Board and wiring).
11. Lift the LCD panel from the front cabinet.
2
d
3
2
1
4.
EN 17
1
b
G_17150_118.eps
c
160807