Philips LC7.1HE LA Service Manual page 16

EN 16 4. LC7.1HE LA
4.3.11 LCD Panel 26" models
1. Remove the rear cover, as described earlier.
2. Refer to figures "LCD panel (26" models)" below.
3. Unplug the connectors from the SSB [a].
4. Unplug the connectors from the Main Supply Panel [b] and
optional Smart Card Interface.
5. Unplug the connectors from the LED & IR board [c].
6. Unplug the outer connectors [d] from the loudspeakers.
Mechanical Instructions
b
d
Figure 4-17 LCD panel (26" models) [1/2]
3
1
Figure 4-18 LCD panel (26" models) [2/2]
7. Do NOT forget to unplug the LVDS connector [e] from the
SSB. Important: Be careful, as this is a very fragile
connector!
8. Remove the SSB, the Main Supply Panel and Smart Card
Interface as described earlier.
9. Remove screws [1] that hold the central sub-frame.
10. Remove LCD panel fixation screws [2].
11. Lift the complete central sub-frame from the set (incl. the
i-Board and wiring).
12. Remove LCD panel fixation screws [3].
13. Lift the LCD panel from the front cabinet.
e
a
d
2
c
G_17150_112.eps
140807
3
c
G_17150_113.eps
140807