Refrigerators & Freezers • Operation; Warnings; Temperature Control; Rotary Thermostat (Knob Control) - Dometic L-2083 Installation And Operation Manual

Marine refrigerators with built-in condensing units
Table of Contents

Advertisement

Refrigerators & Freezers • Operation

Warnings

This section of the manual refers to essential safety Operation information for all
compressor-type refrigerators and freezers (including Portable and Special
Purpose Units) provided by Dometic Corporation.
Before carrying out any maintenance or cleaning operations, disconnect appliance from
power supply via the circuit breaker.
Do not put glass containers holding liquids in the freezer compartment.
Dispose of packaging material in accordance with local laws for sorted waste recycling.
For any operational problems call your dealer, or call Dometic Corporation at 804-746-1313
or 954-973-2477. Ask for the Tundra service department.

Temperature Control

Each appliance is fitted with a manual thermostat which automatically maintains set
temperatures. There are two (2) types of thermostats. Operation instructions for each are
included here.

Rotary Thermostat (Knob Control)

(See Fig. 2, page 19)
1. Select desired temperature by means of the adjustment knob.
2. The refrigerator is STARTED by turning the knob clockwise. It clicks "ON." Temperature
setting range is shown using a band that thickens in the clockwise direction. The thicker
the band, the colder the setting.
Some models are fitted with thermostats with different temperature scale
markings than those described above or displayed in Fig. 2. In this case,
the temperature is still lowered by turning the knob clockwise.
3. To turn OFF the unit, turn the knob to "0" or "OFF." It clicks "OFF."
Operation
10
❖ ❖ ❖ ❖ ❖
English

Advertisement

Table of Contents
loading

Table of Contents