Remote Control Functions
The receiver uses a computer-based learn routine to learn the remote
control buttons. The standard button configuration is described below.
➢ Standard Configuration
Button
The lock function is controlled by pressing
When held for more than 1.5 seconds, Panic is activated.
Button
The unlocking function is controlled by pressing
control for one second. You can also turn Panic off with this button.
Button
Silent Mode
™
ing
. Silent Mode works by pressing
before locking or unlocking. An optional trunk release is controlled by
pressing and holding
�������
Button
Remote start is activated when you press this button for one second.
Buttons
+
Car Finder is controlled by pressing these two buttons.
+
+
�������
When simultaneously pressed these buttons control the rear window
defogger during remote starting.
and
Timer mode is activated when you press these buttons.
2
�������
and an optional auxiliary function are controlled by press-
for 1.5 seconds.
Buttons
Buttons
�������
�������
�������
© 2009 Directed Electronics. All rights reserved.
button for one second.
on the remote
for less than one second