Full Silent Arm Protection; Sensor Warn-Away Messages; Full Trigger Messages; Emergency Override - Directed Electronics PYTHON 333 Owner's Manual

Full Silent Arm Protection

Sensor warn-away, sensor full trigger and point of entry activations
will only send messages to the remote, with parking light flash and
siren outputs defeated.

Sensor Warn-away Messages

When the remote receives a sensor warn-away message it emits 10
beeps (if on) and displays a sensor zone specific
for 30 seconds. Warn-away messages cannot be reviewed or dis-
played in reports.

Full Trigger Messages

A full trigger message generates a full trigger output of siren tones and
zone specific
long beep per minute for 10 minutes.
To stop the output and alert, press a command button to perform a
command, or Press the

Emergency Override

The following procedure disarms the system when a programmed re-
mote is not available. Number of presses__________
Turn
1.
Press
2.
(the default is 1 press).
3. After a few seconds the siren output ceases and the system
is disarmed.
Note
As a precaution, if programmed for passive arming or auto
re-arming the system should be placed into valet mode until
a remote is available .
28
text followed by an alert that consists of 1
TRIGGER
button.
the ignition on.
the control center button the correct number of times
© 2009 Directed Electronics. All rights reserved.
SENSOR WARN
text