Linksys WRT160NL User Manual page 36

Appendix A
system settings. Click the Computer Name tab. The
workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
1. Access the web-based utility of the Router. (Refer to
Chapter 3: Advanced Configuration, page 4.)
Storage tab.
2. Click the
3. Click the Administration tab.
4. In the Workgroup field, enter the workgroup name of
your computer.
5. Click Save Settings.
In Windows XP, you do not see the Router in the My
Network Places screen.
In the Network Tasks section, click Show icons for
networked UPnP devices. If the Router does not appear,
follow these instructions:
1. Go to Start > Control Panel > Firewall.
Exceptions tab.
2. Click the
UPnP Framework.
3. Select
4. Click OK.
In Windows XP, you do not see your USB storage device
in the View workgroup computers screen.
Make sure the Router and your computer use the same
workgroup name. (The default workgroup name of
the Router is workgroup. In Windows XP, go to Start >
Control Panel > System. Click the Computer Name tab.
The workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
1. Access the web-based utility of the Router. (Refer to
Chapter 3: Advanced Configuration, page 4.)
Storage tab.
2. Click the
Administration tab.
3. Click the
4. In the Workgroup field, enter the workgroup name of
your computer.
Save Settings.
5. Click
WEB:
If your questions are not addressed
here, refer to
www.linksysbycisco.com
Wireless-N Broadband Router with Storage Link
the Linksys website,
Troubleshooting
32