Charging The Lithium-Ion Battery Cartridge (Using The Cu-7001) - Denso BHT-7000 User Manual

Denso bar code handy terminal user's manual bht-7000
Hide thumbs Also See for BHT-7000:
Table of Contents

Advertisement

5.5 Charging the Lithium-ion Battery
Cartridge (using the CU-7001)
Service Life of Lithium-ion Battery Cartridge:
Lithium-ion batteries used in the battery cartridge will gradually deteriorate during
the repeated cycles of charging and discharging due to its properties, even under
normal use. When the battery service period becomes shortened due to its deterio-
ration even if it has been charged for the specified hours, replace the battery
cartridge with a new one. Generally, it is necessary to replace the battery cartridge
after it has undergone approx. 300 cycles of charging and discharging operation.
The charging time is approx. 4 hours if the "Charge the battery!" message is
displayed on the BHT-7000. The battery cartridge not discharged so much will be
fully recharged in shorter time.

Advertisement

Table of Contents
loading

Table of Contents