Denon DRA-395 Operating Instructions Manual page 18

ENGLISH
[2] Playing a source other than the one currently playing in a different room (MULTI mode)
B
2
1
5
4
DISPLAY
ZONE 2 playback method
1 Press the ZONE 2 button.
Or, with the remote control, press "ON" .
ZONE 2
(Main unit)
2 The MULTI indicator and the ZONE 2 indicator light.
When this unit has been set to the REC OUT mode, the
REC OUT mode is given priority and so the MULTI mode is
not engaged. The MULTI indicator does not light for this
reason. (Note that indicator of ZONE 2 lights and the signal
of the source selected in the REC OUT mode is output to
ZONE 2 OUT.)
When used in the MULTI mode, check that the REC OUT
mode setting is off.
When the unit is not set to MULTI mode, please note that
the selection of SOURCE with the Remote Commander's
MULTI SOURCE function button as well as the UP and
DOWN control of Tuner Presets are not permitted.
18
1, 4 3
RANDOM 6 7 8 9
CD
REPEAT DISC SKIP ＋ 3 2 1
A / B 4 REC 3 2
ON
MAIN TAPE
6 7 0 1
OFF
ZONE 2 ZONE 3 MULTI ROOM
ON • ON •
VOLUME VOLUME
OFF ª OFF ª
TUNER PHONO V. AUX VCR DVD / VDP
3, 6
CD PHONO DVD / VDP
•
PRESET
CDR / TAPE CD VCR
ª
A SPEAKER B TUNER CDR / TAPE V. AUX
DIMMER CH VOL SHIFT
• •
STATUS
• PRESET MASTER VOL
2
ZONE 2
ON
(Remote control unit)
3 Select the source to be output to the
ZONE 2 output terminal. Press the
SELECT button repeatedly until the
desired source appears on the display.
When using the remote control, make
the selection with the MULTI ROOM
FUNCTION button.
4 The selected source is indicated.
To cancel the MULTI mode.
Press the ZONE 2 button.
When using the remote control, press the ZONE 2 OFF
button.
ZONE 2
(Main unit)
5 The output level of the ZONE 2 OUT
terminals can be controlled using the
ZONE 2 VOLUME • and ª buttons on the
remote control unit.
DEFAULT SETTING (MULTI VOLUME LEVEL) :
- - - dB (MINIMUM)
6 When the MULTI SOURCE function is set
to TUNER, the preset channel can be
selected using the PRESET • and ª
buttons on the remote control unit. (This
is only possible when the main unit is in
the MULTI mode.)
NOTE:
Note that this also switches the preset reception channel on
the main unit when playing or recording the tuner in the
MULTI mode.
Operations related to ZONE 3 can be performed by the same
operations as those related to ZONE 2. Operations related to
ZONE 3 can be performed by the same operations as those
related to ZONE 2.
The ZONE 2 and ZONE 3 on/off operation and the volume level of
the various zones can be individually operated and set.
SELECT
(Main unit)
EX:CD
CD
(Remote control unit)
ZONE 2
OFF
(Remote control unit)
ZONE 2
•
VOLUME
ª
(Remote control unit)
•
PRESET
ª
(Remote control unit)