Connections; Normal Play - Denon DCM-65/35 Operating Instructions Manual

CONNECTIONS

(1) Connecting the Output Terminal
• Connect one end of the connection cord supplied with the CD Player to
the output terminals, left (L) and right (R) of the CD Player, and the other
end to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R), of
the amplifier.
DCM-65/35
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
(Amplifier)
SIGNAL
GND
SPEAKER SYSTEMS
R
INPUTS PB REC
PHONO CD TUNER AUX TAPE-1 TAPE-2 TAPE-1 TAPE-2
/DAT /MD /DAT /MD
L L
R R
(2) Connecting the Digital Output Jack (COAXIAL) (DCM-65 only)
• Use a 75 /ohm pin cord to connect the digital output jack (COAXIAL) of
the DCM-65 to the digital input jack (COAXIAL) on a digital processor or
MD recorder, available in stores.
DCM-65/35
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
Digital processor or MD recorder
DIGITAL INPUT
COAXIAL
OPTICAL

NORMAL PLAY

Follow the steps below to get an understanding of the disc play
procedure.
(1) Starting Playback
HDCD
1
DCM-65
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER 2 TRACK
REMOTE 3
SENSOR DISC ‚⁄ MIN SEC
4
¤ ‚‹ fi‚
5
5 DISC AUTOMATIC DISC LOADING SYSTEM
¢ ON £ OFF
PHONES
1. Turn the power switch on and press the open/close (
button to open the drawer.
2. Set the disc to be played in the front side tray.
3. Press the play button ( ).
1
4. The drawer closes and the disc just loaded is played.
5. The disc number, track number and elapsed time, etc., for the disc
currently playing appear on the display window.
6. If the open/close ( OPEN/CLOSE) button is pressed while a disc is
5
playing, playback continues, but the drawer opens and four discs can be
replaced. The disc that can be replaced switches when the DISC SKIP
button is pressed.
Press the open/close ( OPEN/CLOSE) button again to close the drawer.
5
Power supply outlet
L
A
B
AC OUTLET
Power supply outlet
STOP PAUSE PLAY
REPEAT PROG
1 2 3 4
5 6 7 8
9 101112
13141516
OPEN/CLOSE DISC SKIP
( 1 PLAY )
OPEN/CLOSE)
5
(3) SYNCHRO Jack Connections
• Connect the SYNCHRO jack with a DENON cassette deck which is
equipped with a SYNCHRO jack, then make a synchronized recording. Use
the connection cord supplied with the cassette deck.
• To make use of this function, also connect the output jacks and make the
settings so that a recording can be made from the CD player to the
cassette deck.
DCM-65/35
IN OUT COAXIAL
SYNCHRO CONTROL DIGITAL OUT
LINE OUT
VARIABLE
(Cassette Deck)
(2) Stopping Playback
HDCD
1
DCM-65
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER 2 TRACK
REMOTE 3
SENSOR DISC ‚⁄ MIN
4
¤ ‚‹ fi‚
5
5 DISC AUTOMATIC DISC LOADING SYSTEM
¢ ON £ OFF
PHONES
1. Press the stop button ( STOP) to stop playback.
2
2. To replace discs, press the open/close (
The disc which was playing switches over to the front side and the drawer
opens.
• Set the disc you want to
played in the front side.
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-65
¢ ON £ OFF
PHONES
ENGLISH
Power supply outlet
STOP PAUSE PLAY
REPEAT PROG
1 2 3 4
SEC 5 6 7 8
9 101112
13141516
OPEN/CLOSE DISC SKIP
( 2 STOP )
OPEN/CLOSE) button.
5
HDCD
1
STOP PAUSE PLAY
REPEAT PROG
2 TRACK
1 2 3 4
REMOTE 3
SENSOR DISC ‚⁄ MIN SEC 5 6 7 8
4
¤ ‚‹ fi‚ 9 101112
5
13141516
OPEN/CLOSE DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
9