Table of Contents
Advertisement
[4] PART NAME AND FUNCTION
1. External view
No.
Name
1
Exit tray
2
Paper clip tray
3
Document feeder indicator
4
RADF feeding roller cover
5
Operation panel
6
Document guides
7
Document feeder tray
8
Document feeder cover
9
Document glass
F
RADF exit area
G
RADF exit roller cover
H
Manual feed tray paper guides
I
Manual feed tray
J
Exit area cover
K
Power switch
L
Duplex module
M
Paper tray 1
N
Paper tray 2
O
Paper tray 3
P
Front cover
Q
Waste toner bottle cover
R
Handles
S
Upper side cover
T
Lower side cover
1 2 3
14
15
Finished copies are deposited in the exit tray.
Keep paper clip here.
Indicate document feeder condition.
Open to remove misfed documents.
All copier controls are located here for easy operation.
Adjust to the size of the documents.
Holds up to 50 documents.
Open to make copies from the document glass.
All documents which cannot be copied from the RADF must be copied here.
Finished documents are output here.
Open to remove misfed documents.
Adjust to the width of the copy paper.
Special papers (including transparency film) and copy paper can be fed from the manual feed tray.
Open to remove misfed paper.
Press to turn copier power on and off.
The duplex module provides duplex copying capability.
Holds 500 sheets of 20 lb. bond paper. Copy paper size can be changed by changing the inner cassette.
Holds 500 sheets of 20 lb. bond paper.
Holds A4 or letter sized paper. Tray capacity is 3,000 sheets of 20 lb. bond paper.
Open to remove misfeeds and to service the copier.
Open to replace the Waste toner bottle.
Pull out to move the copier.
Open to remove misfeeds in the paper feed area.
Open to remove misfeeds in paper tray 2 and 3.
4
5
6
7 8 9
16 17 18 19 20
21 22 23 24
Function
4 – 1
10
11 12 13
Advertisement
Table of Contents
