Advertisement
Input type:
Input sensitivity:
Adjustment:
Bass unit:
Treble unit:
Dimension:
Net Weight:
Gross Weight:
Page 9
Troubleshooting
●Switch the EDIFIER e10BT off then on and reconnect to the audio source.
● Ensure Bluetooth function is enabled compatible on your Bluetooth devices.
●Move the devices closer and retry the connection.
●Try another Bluetooth device for connection.
●Please check if power is connected, and if the wall outlet is switched on.
●Please switch the system off then on and reconnect to the audio source.
●Please check if the system is in STBY.
●Please check if the master volume is turned to minimum.
●Please check if the audio input cable is connected correctly.
●Please check if there is signal from audio source.
If you have any further questions or concerns regarding EDIFIER Products...
Asia, Europe, Oceania:
Please visit our website at: www.edifier.com, or email EDIFIER Support for further assistance at:
main@edifier.com,
Dear Customer, thank you for purchasing this EDIFIER product. For the EDIFIER warranty applicable for this
product, we refer you to the Edifier website www.edifier-international.com/warranty-terms.
Canada/USA/Mexico: www.edifier.ca, Email:
If you prefer, you may contact us by phone, Toll Free: 1-877-EDIFIER (334-3437) in Canada, 1-800-688-7406 in
US.
South America: Please visit
contact information.
AUX
R/L: 700 mV±50mV
SW: 350 mV±50mV
Buttons on active speaker
3 inch (82mm), magnetically shielded, 6ohm
1½ inch(40mm), magnetically shielded, 8ohm
105(W) × 310(H) ×180(D) mm
Approx. 2.4kg
Approx. 3.0kg
service@edifier.ca
www.edifier.com
(English) or
www.edifierla.com
(Spanish/Portuguese) for detailed local
Advertisement
